To find the right Consumables for your Printer use the search below with your Printer Model or Cartridge Part # .
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Network manageable
Provides remote management of the UPS over the network.
Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
LED status indicators
Quickly understand unit and power status with visual indicators.
Serial Connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Disconnected battery notification
Warns when a battery is not available to provide backup power.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Predictive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Resettable circuit breakers
Enables a quick recovery from overload events.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment
Feature | Description |
Product Description | APC Smart-UPS 1000 LCD - UPS - 670 Watt - 1000 VA |
Device Type | UPS - external |
Nominal Output Voltage | 120V |
Dimensions (WxDxH) | 17.1 cm x 43.9 cm x 21.9 cm |
Output Voltage Distortion | Less than 5% at full load |
Weight | 18.9 kg |
Output Frequency (sync to mains) | 47 - 53 Hz for 50 Hz nominal,57 - 63 Hz for 60 Hz nominal |
Input Voltage | AC 230 V |
Crest Factor | 0.125694444 |
Output Voltage | AC 220/230/240 V ± 5% ( 47 - 53 / 57-63 Hz ) |
Waveform Type | Sine wave |
Power Provided | 670 Watt / 1000 VA |
Output Connections | (8) NEMA 5-15R |
Output Connector(s) | 8 x power IEC 320 EN 60320 C13 |
Input | Nominal Input Voltage 120V |
Input Frequency 50/60 Hz +/- 3 Hz (auto sensing) | |
Input Connections NEMA 5-15P | |
Cord Length 1.83 meters | |
Input voltage range for main operations: 82 - 144V | |
Input voltage adjustable range for mains operation: 75 - 154V | |
Battery | Lead Acid |
Battery Type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
Run Time (Up To) | 6.1 min at full load |
Typical recharge time | 3 hour(s) |
Networking | RS-232, USB |
Communications & Management | Interface Port(s): DB-9 RS-232,SmartSlot,USB |
Available SmartSlot™ Interface Quantity: 1 | |
Control panel: Multi-function LCD status and control console | |
Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays | |
Surge Protection and Filtering | Surge energy rating: 459 Joules |
Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 | |
Environmental | Operating Environment 0 - 40 °C |
Operating Relative Humidity 0 - 95% | |
Operating Elevation 0-3000 meters | |
Storage Temperature -15 - 45 °C | |
Storage Relative Humidity 0 - 95% | |
Storage Elevation 0-15000 meters | |
Audible noise at 1 meter from surface of unit: 41.00 dBA | |
Online Thermal Dissipation 100.00 BTU/hr | |
Manufacturer Warranty | 3 years warranty |